Setup to Sell   Home Staging and Redesign

 
 
   Our Company What Is Staging Gallery Services Redesign
 
 

Transform your home into a retreat. A place that is uniquely you. Why pay high prices for an Interior Decorator when Setup to Sell can Redesign your home using everything you already have   

 
 

 

 Things You'll Need:  

Tap                              Tape measure                                       Utility knife

                            Roll up blind                                                Fabric

                            Scissors                                                    Trim

                            Cloth adhesive spray                                 Iron

                            Fusible sewing tape                                 Hot glue gun

                            Cords, ribbons or rope                              Staple gun  

Find the width of the window by using a tape measure. Use a utility knife to cut the cardboard tube 1/2 inch shorter than the window's width. Measure the window's height. Add 8 inches for the extra fabric needed on the top and bottom and 2 inches extra on either side.

Put the tube at the top of the fabric and fasten the tube to the hem with a hot glue gun or a staple gun. Roll the tube until the fabric covers it, and glue the fabric to the tube with a hot glue gun.  

Roll out the blind in full and lay your fabric over it, make sure you have material hanging off each side to fold over the edges. Spray your blind using the spray adhesive and slowly lay your fabric onto the blind, starting from the top and working your way down. Be sure to smooth any wrinkles out as you go..

Spray cloth adhesive to the back of any trim or design you plan to add. Apply quickly and let dry according to manufacturer's instructions.

Crease and iron a hem on the bottom  of the fabric with fusible sewing tape. Flip the blind over, iron the sides of the fabric to fold over the edges, use spray adhesive and to attach to the blind.

You can use a 1 x strip of wood at the bottom covered by the hem, or raise or lower the shade by rolling it up and tying braided cords, ribbons, rope, or other materials around it to fit your theme. 

Install the shade on the rod in the window and you've just made yourself an instant no sew window blind.

 


"Let The Light Shine In" 

 
 
 
 
Copyright 2009   Setup to Sell    All rights reserved